Lathe Revolving Centre - carbide tipped MT3
Precision, hardened and ground Lathe Revolving Centre dual bearing-carbide tipped MT3
Consists of Three anti-friction Steel bearings.
One needle roller bearing, one thrust ball bearing and one deep groove ball bearing.
Hardened and Ground (60-62 HRC) Steel with 60° tip angle.
Bearings are Pre-loaded and pressed to avoid starting loads.
Well lubricated to protect against containments and coolants
Run out within .0002" (.005 mm)
|
No.
|
Point Diameter
|
Body Diameter
|
Overall Length
|
|
Inch
|
MM
|
Inch
|
MM
|
Inch
|
MM
|
|
MT 3
|
15/16
|
24
|
2-5/16
|
60
|
7-1/4
|
185
|
